Have you been eyeing off those painting jobs around the house? With the cold weather outside, now is a good time to tackle indoor tasks
Before you begin, make sure you have the right equipment.
Most jobs require both a brush and a roller – the roller for large surfaces and the brush to do the finer work such as edges or decorative surfaces. Brushes are generally better for weatherboards as well.
Choosing a roller:
To use a roller you'll need a tray, frame, roller cover and possibly an extension pole.
- For a smooth or high gloss look, choose a smoother roller - one with a short (5-7mm) nap.
- For slightly rough surfaces or low sheen paint, choose a medium roller - an 8-12mm nap.
- For rough surfaces, and some special finishes, you'll need a roller with a long nap (20mm or more) for rough surfaces.
How to use a roller: Before using the roller, de-fuzz the sleeves by washing it in water.
After dipping the roller in the paint tray and rolling it on the corrugated end, of the tray, roll the paint onto the surface with in a zig-zag pattern.
How to choose a brush:
- 12-25mm brushes are good for small areas and touch-up work
- 38mm brushes are suitable for furniture, small panels and window frames.
- 50mm brushes for medium sized jobs such as doors and cabinets.
- 63mm is a good utility brush for walls, cupboards, doors and guttering.
- 75mm – 100mm brushes are for larger areas such as walls, post and rail fences and steps.
- Long handled cutter brushes are for door and window frames and ceiling/wall corner sections.
How to use a brush:
Dip the brush only half way into the paint. Hold the brush so you can control the pressure of the bristles against the wall. Paint with light, short strokes and once you've finished an area, softly stroke the surface in a uniform direction.
For more inspiration visit: au.pinterest.com/yourhomefairfax.